1˵
    1TIM3 CH1 CH2 CH3 CH4 ﵽCCֵACTIVEƽ
2ʹû
    KEIL MDK-ARM V5.34.0.0
    Ӳ 
        N32G05xϵУ
            N32G05xRBQ7_STB V1.0
        N32G05xϵУ
            N32G05xRBL7_STB V1.0
3ʹ˵
    ϵͳ:
        1ʱԴ
                    HSI=8M,SYS CLK=64M,TIM3 CLK=32M
        2˿ã
                    PC6ѡΪTIM3 CH1
                    PC7ѡΪTIM3 CH2
                    PC8ѡΪTIM3 CH3
                    PC9ѡΪTIM3 CH4
                    PA3ѡΪIO 							
    ʹ÷
        1򿪵ģʽʾ߼ǹ۲TIM3 CH1 CH2 CH3 CH4Ĳ
        2ʱеCC1 CC2 CC3 CC4֮󣬶ӦͨΪActive
4ע
    
	
	
	
1. Function description
     1. After TIM3 CH1 CH2 CH3 CH4 reaches the CC value, it outputs ACTIVE level
2. Use environment
	Software development environment: KEIL MDK-ARM V5.34.0.0
    Hardware development environment:
         N32G05x series:
            Developed based on the evaluation board N32G05xRBQ7_STB V1.0
         N32G05x series:
            Developed based on the evaluation board N32G05xRBL7_STB V1.0
3. Instructions for use
    System Configuration;
        1. Clock source:
                    HSI=8M,SYS CLK=64M,TIM3 CLK=32M
        2. Port configuration:
                     PC6 is selected as TIM3 CH1 output
                     PC7 is selected as TIM3 CH2 output
                     PC8 is selected as TIM3 CH3 output
                     PC9 is selected as TIM3 CH4 output
                     PA3 is selected as IO output
     Instructions:
         1. After compiling, turn on the debug mode, use an oscilloscope or logic analyzer to observe the waveform of TIM3 CH1 CH2 CH3 CH4
         2. After the timer runs to CC1 CC2 CC3 CC4, the output of the corresponding channel becomes Active
4. Matters needing attention
     without
	