1˵

	/* ̹ */
        òʾֱӶFLASHжд


2ʹû

    KEIL MDK-ARM V5.34.0.0
    Ӳ 
        N32G05xϵУ
            N32G05xRBQ7_STB V1.0
        N32G05xϵУ
            N32G05xRBL7_STB V1.0
        

3ʹ˵
	
	/* ģ÷:ʱӣI/O */
        SystemClock64MHz
        USARTTX - PA9RX - PA10115200

	/* DemoĲԲ */
        1.سλУ
        2.鿴ڴӡϢдFLASHȡݶԱȾͬʱӡϢΪԽ


4ע


1. Function description

	/* Briefly describe the project function */
         This routine configures and demonstrates direct read and write operations to FLASH


2. Use environment

	Software development environment: KEIL MDK-ARM V5.34.0.0
    Hardware development environment:
         N32G05x series:
            Developed based on the evaluation board N32G05xRBQ7_STB V1.0
         N32G05x series:
            Developed based on the evaluation board N32G05xRBL7_STB V1.0
        

3. Instructions for use

	/* Describe related module configuration methods; for example: clock, I/O, etc. */
         SystemClock: 64MHz
         USART: TX - PA9, RX - PA10, baud rate 115200

	/* Describe the test steps and phenomena of the Demo */
         1. After compiling, download the program to reset and run;
         2. Check the printing information of the serial port. When the data written to FLASH is the same as the data read, the printing information is the end of the test;


4. Matters needing attention
