1˵

    չʾͨⲿжϣ LED ˸


2ʹû

    KEIL MDK-ARM V5.34.0.0
    Ӳ 
        N32G05xϵУ
            N32G05xRBQ7_STB V1.0
        N32G05xϵУ
            N32G05xRBL7_STB V1.0   

3ʹ˵

    /* ģ÷:ʱӣI/O */
    SystemClock64MHz
    GPIOPA4 ѡΪⲿжڣPC12  LED ˸


    /* DemoĲԲ */
    1.سλУ
    2.ɿ KEY1 LED ˸


4ע
    

1. Function description

    This example shows how to control LED blinking by externally triggering an interrupt.
    

2. Use environment

	Software development environment: KEIL MDK-ARM V5.34.0.0
    Hardware development environment:
         N32G05x series:
            Developed based on the evaluation board N32G05xRBQ7_STB V1.0
         N32G05x series:
            Developed based on the evaluation board N32G05xRBL7_STB V1.0


3. Instructions for use

     //Describe related module configuration methods; for example, clock, I/O, etc.
     1. SystemClock: 64MHz
     2. GPIOPA4 is selected as the external interrupt entry, PC12 controls the LED to flash.

     //Describe the test steps and phenomena of the Demo
     1. Compile and download the code to reset and run.
     2. Press and release the KEY1 button,then the LED will flash.

4. Matters needing attention
     None