1˵

    /* ̹ */
        òʾFLASHд


2ʹû

        KEIL MDK-ARM V5.34.0.0
                      IAR EWARM 8.50.1
    
        ӲN32G430C8L7-STB V1.0


3ʹ˵

    /* ģ÷:ʱӣI/O */
        SystemClock128MHz

        USARTTX - PA9RX - PA10115200

    /* DemoĲԲ */
        1.سλУ
        2.FLASHд鿴ϢFLASHдʧʱӡϢΪͨ


4ע



1. Function description
    /* A brief description of the engineering function */
    This routine configures and demonstrates enabling FLASH write protection

2. Use environment

    Software development environment: KEIL MDK-ARM V5.34.0.0
                                      IAR EWARM 8.50.1
    Hardware environment: Developed based on the evaluation board N32G430C8L7-STB V1.0
        
3. Instructions for use
    
    /* Describe the related module configuration method; For example: clock, I/O, etc. */
    SystemClock: 128 MHZ
    USART: TX-PA9, RX-PA10, baud rate 115200
    /* Describes the test steps and symptoms of Demo */
    1. Reset and run the downloaded program after compilation;
    2. Enable FLASH write protection and view information about the serial port. If data fails to be written to the FLASH, the test passes.
    
4. Precautions
    None