1˵

	/* ̹ */
        òʾֱӶFLASHжд


2ʹû

        KEIL MDK-ARM V5.34.0.0
                      IAR EWARM 8.50.1
    
        ӲN32G430C8L7-STB V1.0


3ʹ˵
	
	/* ģ÷:ʱӣI/O */
        SystemClock128MHz

        USARTTX - PA9RX - PA10115200

	/* DemoĲԲ */
        1.سλУ
        2.ִжʹܣλflashL1״̬ͨӡϢ۲쵽ͨ

4ע
    

1. Function description
	/* A brief description of the engineering function */
    This routine configures and demonstrates reading and writing directly to FLASH

2. Use environment
	
    Software development environment: KEIL MDK-ARM V5.34.0.0
                                      IAR EWARM 8.50.1
    Hardware environment: Developed based on the evaluation board N32G430C8L7-STB V1.0
        
3. Instructions for use  
	/* Describe the related module configuration method; For example: clock, I/O, etc. */
    SystemClock: 128 MHZ
    USART: TX-PA9, RX-PA10, baud rate 115200
    
	/* Describes the test steps and symptoms of Demo */
	1. Reset and run the downloaded program after compilation;
	2. Program execution read protection enable, program reset, flash into the read protection L1 state, through the print information to observe the above phenomenon then the test passed.

4. Precautions
	None