1˵
    1SLEEPģʽĽ˳


2ʹû

    KEIL MDK-ARM V5.25

    Ӳ
        1N32G43XRL-STB V1.0
        2MCUN32G435RBL7


3ʹ˵
    
    ϵͳã
        1ʱԴHSE+PLL
        2ʱƵʣ108MHz
        3ԴPA0
        4ã
            - ΪUSART1TXPA9  RXPA10:
            - λ8
            - ֹͣλ1
            - żУ飺
            - ʣ 115200 

    ʹ÷
        KEIL±¼壬ӵϵһᣬԱС»ѰPA0,LED1˸
        Ա,һֱС


4ע
    



1. Function description
    1. Enter and exit the SLEEP mode.

2. Use environment
    Software development environment: KEIL MDK-ARM V5.25
    Hardware environment:
	1. based on the evaluation board N32G43XRL-STB V1.0 development
	2. MCU: N32G435RBL7

3. Instructions for use    
    System configuration;
	1. Clock source: HSE+PLL
	2. Clock frequency: 108MHz
	3. Wake up source: PA0
	4. Serial port configuration:
	    - Serial port: USART1 (TX: PA9 RX: PA10) :
	    - Data bit: 8
	    - Stop bit: 1
	    - Parity check: None
	    - Baud rate: 115200
    Instructions:
	After compiling under KEIL, it was burned to the evaluation board, connected to the ammeter in series, and after powering on for a while, the current decreased significantly. Press the wake up button PA0,LED1 flashes,
	The current increases significantly, and then decreases again.

4. Matters needing attention
    None

