1˵
    1TIM1 CH2ſCH1TIM3
2ʹû
      KEIL MDK-ARM V5.34.0.0
    Ӳ      N32G031C8L7-STB V1.0
3ʹ˵
    ϵͳã
        1ʱԴ
                    HSE=8M,PLL=48M,AHB=48M,APB1=48M,APB2=48M,TIM1 CLK=48M,TIM3 CLK=48M
        2˿ã
                    PA8ѡΪTIM1 CH1
                    PA3ѡΪTIM1 CH2
                    PA6ѡΪTIM3 CH1
        3TIM
                    TIM1 CH2 ſCH1ſTIM3
    ʹ÷
        1򿪵ģʽʾ߼ǹ۲TIM1 CH1,TIM3 CH1Ĳ
        2TIM1 CH2ߵƽʱʼ͵ƽֹͣ
4ע
    

1. Function description
     1. TIM1 CH2 gated CH1 and TIM3
2. Use environment
    Software development environment: KEIL MDK-ARM V5.34.0.0
    Hardware environment: Developed based on the evaluation board N32G031C8L7-STB V1.0
3. Instructions for Use
    System configuration
        1. Clock source:
                     HSE=8M, PLL=48M, AHB=48M, APB1=48M, APB2=48M, TIM1 CLK=48M, TIM3 CLK=48M
        2. Port configuration:
                     PA8 is selected as TIM1 CH1 output
                     PA3 is selected as TIM1 CH2 input
                     PA6 is selected as TIM3 CH1 output
        3. TIM:
            TIM1 CH2 Gated CH1, Gated TIM3
     Instructions:
    1. Open debugging mode after compilation and observe TIM1 CH1, TIM3 CH1 waveforms with an oscilloscope or logic analyzer
         2. TIM1 CH2 high level timer starts counting, low level stops
4. Matters needing attention
    None