1˵

	/* ̹ */
        òʾFLASHд


2ʹû

	/* Ӳ̶ӦĿӲƽ̨ */
        壺N32G031C8L7-STB V1.0
        

3ʹ˵
	
	/* ģ÷:ʱӣI/O */
        SystemClock48MHz
        USARTTX - PA9RX - PA10115200

	/* DemoĲԲ */
        1.سλУ
        2.FLASHд鿴ϢFLASHдʧʱӡϢΪͨ


4ע


/***   For English user   ***/
1. Function description

	/* Briefly describe the project function */
         This routine configures and demonstrates enabling FLASH write protection


2. Use environment

	/* Hardware environment: the development hardware platform corresponding to the project */
         Development board: N32G031C8L7-STB V1.0
        

3. Instructions for use

	/* Describe related module configuration methods; for example: clock, I/O, etc. */
         SystemClock: 48MHz
         USART: TX - PA9, RX - PA10, baud rate 115200

	/* Describe the test steps and phenomena of the Demo */
         1. After compiling, download the program to reset and run;
         2. Turn on the FLASH write protection, check the serial port information, when the FLASH data writing fails, the print information is the test passed;


4. Matters needing attention

