1˵

	/* ̹ */
        òʾֱӶFLASHжд


2ʹû

	/* Ӳ̶ӦĿӲƽ̨ */
        壺N32G031C8L7-STB V1.0
        

3ʹ˵
	
	/* ģ÷:ʱӣI/O */
        SystemClock48MHz
        USARTTX - PA9RX - PA10115200

	/* DemoĲԲ */
        1.سλУ
        2.鿴ڴӡϢдFLASHȡݶԱȾͬʱӡϢΪԽ


4ע


1. Function description

	/* Briefly describe the project function */
         This routine configures and demonstrates direct read and write operations to FLASH


2. Use environment

	/* Hardware environment: the development hardware platform corresponding to the project */
         Development board: N32G031C8L7-STB V1.0
        

3. Instructions for use

	/* Describe related module configuration methods; for example: clock, I/O, etc. */
         SystemClock: 48MHz
         USART: TX - PA9, RX - PA10, baud rate 115200

	/* Describe the test steps and phenomena of the Demo */
         1. After compiling, download the program to reset and run;
         2. Check the printing information of the serial port. When the data written to FLASH is the same as the data read, the printing information is the end of the test;


4. Matters needing attention
